Oak Park
- Follow Us :
Oak Park
Once your floors have been sanded and or restored, we then apply our finishes. The finish we use on your floor depends on your personal choice and your environment. We can offer our expert advice on suitability and quality to best suit your desired finish if so desired.
Re-Coating Floors: Prep wash, light sand and apply 1 or 2 coats depending on the condition of the floor or the coating previously used.
New and Old Floors: Preparation for sanding and coating the processes we undertake are in 3 stages.
Polyurethane high gloss finish. It doesn’t require any maintenance and is very simple to clean. However it takes 16 to 36 hours for each coat to dry depending on the weather, but to fully cure the process takes 10 to 14 days.
Water Base comes in gloss as well as the low sheen satin and matt finishes. Water base is a non toxic and non solvent base products, there is little odour which dissipates quickly. Its non-yellowing and you’re able to remain within the premises.
Caulking $3.50 lm + GST minimum
Simply complete the form on right and we will get back to you to arrange a time to discuss your requirements.
0413 - 171 - 811
geejayfloors@optusnet.com.au
Oak Park
